Dažymo pistoletas apatiniu bakeliu 3,5-5bar, 1000cm3 Ø1.4mm (81617)

Bakelio talpa 1.0kg. Purkstukas 1.4mm. Aliuminio bakelis is apacios. Sroves plotis 110 -220mm. Darbinis slegis 3 ~ 4bar. Oro sunaud. 400l/min. Svoris 1.2kg. Product description. Spray gun is used for painting work. Compressed air is essential. The paint from the gun tank and the compressed air supplied to the gun form a mixture of lacquer and air particles at the nozzle outlet of the gun.. Getting started. Use a flat spanner to tighten the nozzle. Check the tightness and reliability of the compressed air supply connections. Blow air hose, before connecting it to the installation. Before using the gun make sure that it is properly cleaned and maintained. Make sure that the container with the coating material has been properly sealed.. Adjustable spray jet width. Changing the width and shape of the spray jet can be achieved by rotating the air nozzle. The shape of the jet can be smoothly adjusted from flat to round depending on the needs. The amount of coating material supplied to the air stream is determined by the volume control knob. The spray adjustment knob adjusts the intensity of the coating material to the air. It is advisable to set the mix stream so as to obtain as small particles of coating material as possible, to provide a better spreading of the coating material on the surface.. Working with a gun. Use a gun to maintain the distance between the gun outlet and the covered surface in the range of 10 to 15 cm. Try to keep the gun outlet perpendicular to the surface to be covered. Avoid curving movements, resulting in uneven distribution of coating material. It is recommended to apply several thin layers, rather than one thick.. Airflow adjustment Depending on the type of coating material, the compressed air quantity must be selected by adjusting the air pressure control knob. If the gun is not equipped with a pressure regulator, adjust the pressure in a pneumatic system, eg with a regulator.. Replacement of the nozzle. Be sure to replace the entire nozzle assembly. The kit includes a coating material nozzle, spigot and air nozzle.. Seal of the needle. Check the sealing of the needle seal during operation. In case of significant wear, replace the gasket during the periodic inspection of the gun using a wrench to remove the seal assembly. Cleaning and maintenance. After finishing work, disconnect the gun from the compressed air system and empty the tool tank from the remaining coating material. Thoroughly clean the container from the residue of the coating material. Thoroughly clean the entire transmission line of the coating material. Inaccurate cleaning will reduce the flow characteristics of the coating material. Clean the air nozzle with a brush dipped in a solvent. Never immerse the entire gun in a solvent. Never clean clogged openings with hard objects, as slight internal damage can adversely affect the performance of the spray jet. After washing the gun, apply a small amount of lubricant to the moving parts of the seal. Tighten the coating material to such an extent to avoid leaks while ensuring a smooth movement of the needle.. Technical data. Index number 81617. EAN 5906083816178. Marka Vorel. PCS unit. Gross Weight (kg) 0.9250. Master Carton MC 20. Pal 120. Pressure [bar] 3.5-5. Packing box color box. Nozzle size [mm] 1.5. Size of the quick coupler [inch] 1/4 ". Yield [l / min] 280-450. Capacity [L] 1