Laidų testeris ir ieškiklis | RJ11 RJ45 (YT-73137)

CABLE LOCATOR AND RJ11 RJ45 NETWORK CABLE TESTER, RESISTANT TO INTERFERENCE. Mark. Yato. Symbol. YT-73137. Series. GRE. Dimensions. 63x134x31 (transmitter), 40x200x32 (receiver) mm. Material. ABS. Application. for inspecting and locating cabling. Laser. NO. Operating temperature range. -10 ~ +40 C. Storage temperature. -10 ~ +40 C. Power supply. battery. Battery type. 3x1.5V; AAA (transmitter), 9V; 6F22 (receiver). Set contents. transmitter, receiver. Mass. 138 (transmitter), 120 (receiver) g. Display type. LED. Functions. locating and routing the wire, locating a break in the wire, verifying the order of connections in the RJ45 cable, checking the telephone line voltage,. Flashlight function. YES. Operating relative humidity Rh. 10-95%. Low battery indicator. Yes. Features continued. checking the polarity of the voltage on the telephone line, checking the presence of a short circuit, adjusting the tracking sensitivity/volume. Signal transmitting distance. > 1 km. The YT-73137 cable locator is a device for controlling and locating cables. It is used to route a wire in the wall, identify a network cable in the server room, locate a break in the car's electrical installation, verify the order of connections in the RJ-45 cable, and check the condition of the telephone line.. It consists of two devices: a transmitter and a receiver. The transmitter is connected to the wire being searched for and then, after turning on the SCAN function, transmits a signal with a frequency known to the receiver. The receiver can wirelessly intercept a signal from a distance of up to several centimeters* from the cable being sought.. It is resistant to interference. The signal received by the receiver is converted into sound free from noise and crackling. The power of the transmitter allows the signal to be transmitted over a cable over a distance of at least 1 kilometer. The built-in jack socket in the receiver allows you to connect, for example, the headphones included in the set.. housing material: ABS. signal tracking sensitivity/volume adjustment. transmitter dimensions and weight: 63 x 134 x 31 mm / 138 g. dimensions and weight of the receiver: 40 x 200 x 32 mm / 120 g. transmitter power supply: 3 x AAA - 1.5V batteries. receiver power supply: 6F22 - 9V battery. low battery indication. Functions:. location and routing of the cable. location of a break in the cable. verification of the order of connections in the RJ45 cable. telephone line voltage control. checking the polarity of the voltage on the telephone line. checking for the presence of a short circuit. Locating cables in walls, including: for safety purposes, it must be carried out without mains voltage present in the cable being sought.. *The receiver will capture a stronger signal if one of the crocodile clips of the transmitter cable is connected to ground. Grounding can be either the grounding wire in the home installation or, if there are no other options, also our body touching the floor. Internal tests confirmed the reception of the signal transmitted in the cable from a distance of 15 cm from the receiver (measurement without any obstacles between the receiver and the cable).