Įrankiai
20-70-556 Kotinės frezavimo staklės Woodland machinery (naujos)
UAB Medienos staklės
15 atsiliepimai
760 €
20-29- Šepetinės šlifavimo staklės WOODLAND MACHINERY (naujos)
UAB Medienos staklės
15 atsiliepimai
4130 €
21-80- Diskinių pjūklų galandimo staklės RS WOOD-CMC (naujos)
UAB Medienos staklės
15 atsiliepimai
5464 €
21-80-027 Diskinių pjūklų galandimo staklės HOLZMANN MTY 8-70
UAB Medienos staklės
15 atsiliepimai
1 €
20-13-300/600 Šlifavimo popierius šepetinėms šlifavimo staklėms (naujas)
UAB Medienos staklės
15 atsiliepimai
25 €
21-80-029 Galandimo staklės tiesiems peiliams HOLZMANN MS 7000
UAB Medienos staklės
15 atsiliepimai
1 €
Staklės / giljotina grindų laminatui | 340 mm | 370 x 600 mm (YT-37311)
Yato
142 €
Prekės aprašymas:
Guillotine for cutting floor panels, cutting width 340 mm, max. the thickness of the material to be cut is 16 mm. The guillotine knife is embedded in aluminum profiles mounted on vertical, steel pedestals. The pressure arm is about 600 mm long, the worktop made of a hard, wear-resistant material is 370 mm x 600 mm. Note the cutter knife is extremely sharp and you should be careful when working with it.. Purpose / application. Guillotine for cutting floor panels and other similar finishing materials up to approx. 16 mm thick.. Usage method. Place the material to be processed on the device table, between the pedestals holding the knife. then, pressing the levers with feeling, lower the blade onto the material and, pressing it, cut off the desired fragment. Due to the extreme sharpness of the knife, special attention should be paid during work.